How do I sync my Xbox controller to another console?
Within 20 seconds, press and hold the controller's Pair button (a circular button on top of the controller as you hold it in your hands) until the controller's Xbox button flashes a few times. That means it's searching for a console. The Xbox button stays lit once it's connected.How to pair an Xbox controller to a second device?
Turn on your controller by pressing the Xbox button . Press the controller's Pair button for 3 seconds and release. On your Android device, open Bluetooth by going to Apps > Settings > Connected devices > Pair new device.How to resync an Xbox controller?
To resync an Xbox One controller:
- Turn on your Xbox One.
- Turn on your controller.
- Press the sync button on the Xbox.
- Press and hold the sync button on your controller.
- Release the sync button on the controller when the Xbox light on the controller stops flashing.
How do I change the pairing on my Xbox controller?
If the controller is connected to a Bluetooth device, double press the Pair button and the controller will immediately switch its connection to the last Xbox Wireless connection it was paired to. To switch back to the paired Bluetooth device, press and hold the Pair button to start pairing mode.What to do if my Xbox controller won't pair with Xbox?
Turn on the console. Press and hold the Xbox button until the controller turns on. Hit the Pair button located on the front right of the console. Press and hold the controller's Pair button—found at the top of the controller near the USB port—within 20 seconds to finish the pairing process.How to CONNECT XBOX ONE CONTROLLER to Xbox One (Xbox Controller Sync & Pairing Tutorial)
How to pair an Xbox controller to an Xbox One?
On the original Xbox One, the Pair button is a circular button on the side, around the corner from the disc tray. Within 20 seconds, press and hold the controller's Pair button (a circular button on top of the controller as you hold it in your hands) until the controller's Xbox button flashes a few times.Why is my Xbox controller blinking and not connecting?
Check the battery: Replace the controller batteries with fresh ones, or make sure that the rechargeable controllers are fully recharged. (Do this even if your controller still has power—low batteries can cause connection and functionality issues.)Why has my Xbox controller unpaired?
Replace the batteries or recharge your controllerSome disconnection issues are power issues in disguise. Dead or dying batteries can cause your controller to stop connecting. Replace your weak batteries with new ones or connect your Xbox controller to its power cable.
Where is the pair button on an Xbox controller?
Pair button (13): This small, slightly raised button is just to the left of the USB port on the top edge of the controller. It's used to wirelessly connect the controller to a console and to enroll in Bluetooth pairing on a Windows device.Can you connect an Xbox controller to a switch without an adapter?
No, an adapter is necessary because the Switch does not natively support the wireless connection protocol used by Xbox controllers.Can you pair Xbox controller to two consoles?
Your controller can only connect to one device at a time. If you've paired it with your mobile device or another console, you'll need to reconnect it to your current device by pressing the Pair button on the console and controller to reconnect.Do all Xbox controllers work on different consoles?
Will my current Xbox controllers and accessories work with Xbox Series X|S? The Xbox Series X|S consoles are compatible with most Xbox One controllers and gaming accessories, including the Media Remote, Chatpad, and Stereo Headset Adapter.Why won't my Xbox controller connect while plugged in?
If the controller doesn't work when connected with a USB cable, double check that the problem isn't with the cable or the port—try a different cable/port connection or connect to a different device.How to update Xbox One controller?
If instructions to install the update don't automatically appear, you can start the process manually. To do this, press the Xbox button to open the guide, choose Profile & system > Settings > Devices & connections > Controllers & headsets, and then select the controller you want to update.Why is my Xbox controller blinking then dies?
Check your batteries.If you are using disposable batteries, replace them with fresh ones. Otherwise, ensure that your controller's batteries or battery pack have a sufficient charge.
Why isn't my Xbox controller pairing?
Remove accessories from your Xbox or PC: Some USB devices, including incompatible or defective USB cables, can interfere with wireless signals. Unplug all USB devices connected to your Xbox or PC. Restart your Xbox or PC and try connecting the controller again.Why is my Xbox One controller blinking but not connecting?
If your Xbox controller blinks, it usually means it's disconnected from your Xbox console and can't reconnect. Let your controller charge for at least 3 hours before troubleshooting it; a low charge can also cause connectivity issues.How to pair an Xbox controller to an Xbox?
Press and hold the small button at the top of the controller, next to the charging port. When it flashes, the controller is in pairing mode. Press the pair button at the bottom of your Xbox.Why is my Xbox not connecting?
Verify that all power cables are firmly seated in the modem, gateway, or router and that all networking devices are powered on. Test your connection again (Profile & system > Settings > General > Network settings > Test network connection). If the connection test is not successful, continue to the next step.
← Previous question
Where did the dragon in Ranni's rise go?
Where did the dragon in Ranni's rise go?
Next question →
How do I reset my Nintendo Switch network settings?
How do I reset my Nintendo Switch network settings?