How to get a nut off a screw that keeps spinning?
To remove a nut that just spins, you need to stop the bolt from turning by either gripping its head, wedging something against it, or using a nut splitter/saw to destroy the nut; try prying the bolt head out, using locking pliers/wrench on the shank, or cutting it, after applying penetrating oil and letting it soak for stubborn cases.How to remove a nut that is spinning?
To get a spinning nut off a bolt, you need to stop the bolt from turning by applying pressure (pulling, prying) from the other side, use a nut splitter, or cut the bolt/nut with a grinder, hacksaw, or cold chisel; apply penetrating oil first, and use a 6-point socket for best grip. For carriage bolts or where the head spins, use pliers/wrench on the head, or create a slot for a screwdriver.How to remove nut stuck on screw?
To remove a stuck nut, first try penetrating oil and a 6-point wrench for grip, using a "back-and-forth" motion to break the bond. If that fails, apply heat (carefully!) to the nut with a torch to expand it, then try again. For stubborn cases, use a nut splitter or cut the nut off with a Dremel, replacing the hardware afterward.How to remove a screw that just keeps spinning?
To remove a spinning screw, you need to create friction or leverage: pry up with a putty knife/pliers while unscrewing, use a rubber band/steel wool for grip, try gripping the head with pliers, or use a screw extractor if it's really stuck, aiming to get the threads to bite again or lift the screw out while turning.How to remove a severely stripped lug nut?
The best way to get a stripped lug nut off involves using specialized extractor sockets, which are hammered onto the nut to grip it, or by using a cold chisel/air hammer to create new edges to turn it, though this risks wheel damage. For persistent nuts, drilling the stud out as a last resort is an option, but always start with gentler methods and use proper tools like a breaker bar and penetrating oil to avoid damaging your wheel.NUT AND BOLT SPIN AT THE SAME TIME? GO TRY THIS RIGHT NOW!!
What do mechanics use to take off lug nuts?
Mechanics use powerful tools like air or electric impact wrenches, which spin off nuts quickly, and breaker bars (long-handled wrenches) for extra leverage on tight nuts, often with a socket. For stubborn ones, they add leverage with a pipe extension or use specialized lug nut extractors, sometimes alongside heat or penetrating oil to loosen rust.How to get a bolt out when it just keeps spinning?
To remove a spinning bolt, you need to create pressure or grip the bolt head while turning the nut; try prying the head outward with a pry bar or screwdriver for leverage, use locking pliers (Vise-Grips) to grab the head, or shock the bolt by tapping it with a hammer as you turn it, which can help the threads re-engage or break rust. If those fail, you might need to use destructive methods like cutting the head off or welding a new nut on.Will heating up a screw loosen it?
Yes, heating a stuck screw or bolt is a very effective way to loosen it because the heat causes the surrounding metal to expand, breaking the rust or thread-locker bond, and the expansion can "re-tap" the threads as it cools, making removal much easier, often with just hand tools. You apply heat to the material around the screw (like the nut or base metal), not just the screw itself, often using a torch, and the expansion/contraction cycle helps to free it.How to unscrew a screw that won't move?
To unscrew a stuck screw, first apply penetrating oil and let it soak; if that fails, use a rubber band or duct tape for grip with a screwdriver, tap the screwdriver with a hammer for shock, use pliers on the head, or try heat/cold to break the bond, escalating to drilling the head if necessary, but always use firm downward pressure.Will WD-40 loosen a stuck nut?
WD-40 Specialist® Penetrant is an excellent loosener and can assist with even the most stubborn of stuck bolts and nuts. Simply spray WD-40 Specialist® Penetrant on the seized bolt or nut and let it work its magic for a couple of minutes.How to remove a stripped seized nut?
7 Ways to Remove a Stripped Nut That Won't Come Off- Use a toothed gripping tool like pliers or a wrench.
- File the nut down to get a better grip.
- Use a hammer and chisel.
- Use a Dremel tool.
- Heat up the nut to loosen it.
- Spray the nut with WD-40.
- Use a bolt extractor or a lug wrench to remove lug nuts.
How to remove a nut that won't move?
To remove a stuck nut, first apply penetrating oil and let it soak, then try a 6-point socket with extra leverage (cheater bar) or an impact driver; if that fails, use heat from a torch (carefully) to expand the nut, followed by more oil, or use a nut splitter or hacksaw as a last resort to cut it off.Why does this nut keep spinning on the bolt?
When a nut spins on a bolt without loosening, it usually means the bolt head is also spinning or the threads are stripped/stuck; the solution involves applying opposing force (prying/wedging under the head), creating a slot to hold the bolt, using penetrating oil, or applying heat, while techniques like using a jam nut or cutting the fastener off are last resorts.How to remove bolt that keeps spinning reddit?
You could try using a Dremel tool, Angle Grinder, Hack saw, or a file to cut a grove in the head of the carriage bolt, turning it into a flat head screw, then use a flat head screw driver to hold the bolt and try to remove the nut.Will heating metal weaken it?
Yes, heating metal can weaken it by making it softer and more pliable (like for blacksmithing), but it can also strengthen it through controlled heat treatments (like quenching for hardness) by altering its crystal structure and removing defects, though excessive or improper heating causes permanent damage like grain growth, leading to brittleness. The key is the method, temperature, and cooling process: gentle heat makes it softer, while specific heating and rapid cooling (quenching) makes it harder, but overheating or slow cooling can make it weaker and brittle.How to loosen a screw with a drill?
To unscrew with a drill, set it to reverse (counter-clockwise), insert the correct driver bit snugly, apply firm, steady pressure straight into the screw head, and squeeze the trigger slowly, increasing speed as needed for stubborn screws, using low torque settings to avoid stripping. For stripped heads, use tricks like a rubber band or duct tape for grip before reversing.How do you remove a screw that just keeps spinning?
To remove a spinning screw, you need to create friction or leverage: pry up with a putty knife/pliers while unscrewing, use a rubber band/steel wool for grip, try gripping the head with pliers, or use a screw extractor if it's really stuck, aiming to get the threads to bite again or lift the screw out while turning.How to get a free spinning nut off?
To get a spinning nut off a bolt, you need to stop the bolt from turning by applying pressure (pulling, prying) from the other side, use a nut splitter, or cut the bolt/nut with a grinder, hacksaw, or cold chisel; apply penetrating oil first, and use a 6-point socket for best grip. For carriage bolts or where the head spins, use pliers/wrench on the head, or create a slot for a screwdriver.What can I use instead of a screw extractor?
If you've got a screw with a stripped head, you've got a power drill and a quality metal drill bit set, but you don't have a screw extractor set, your easiest option is to drill out the screw.How to take off stubborn lug nuts?
To get a stuck lug nut off, first try more leverage with a breaker bar or "cheater pipe," use penetrating oil, or give it a sharp shock with a hammer; if it's stripped, use lug nut extractors that bite in, or as a last resort, carefully cut or drill it off, always wearing safety glasses. Start with the least destructive methods and work your way up to avoid damaging the wheel or stud.Why won't lug nuts come off?
A stuck lug nut usually needs more leverage, penetrating oil, impact/shock, or heat, often applied in combination; start with penetrating oil and a breaker bar with a cheater pipe for leverage, use impacts/hammer taps to shock it loose, then try heat if desperate (carefully) before resorting to specialized extractors or cutting tools if all else fails, always using the correct socket size and safety gear.How does WD-40 help remove lug nuts?
Apply it to the bolt and then tap it using a hammer. This will help the WD-40 penetrant spray to penetrate the fitting and loosen the bolt so that it can removed easily.
← Previous question
What does the ♠ mean in cards?
What does the ♠ mean in cards?
Next question →
Has Bloodborne 2 been confirmed?
Has Bloodborne 2 been confirmed?