What to do if your Xbox One controller won't pair?
To resync an Xbox One controller:
- Turn on your Xbox One.
- Turn on your controller.
- Press the sync button on the Xbox.
- Press and hold the sync button on your controller.
- Release the sync button on the controller when the Xbox light on the controller stops flashing.
Why won't my Xbox One controller pair?
Press the Xbox button to restart the console. If your controller still won't connect to your console after power cycling, try connecting the controller directly to the console using a USB-C cable (or USB to micro-USB cable for Xbox One controllers). Make sure that you use a cable that supports data transfer.Why is my Xbox One controller flashing and not connecting?
An Xbox controller may blink if it loses connection to the console. This could happen due to distance, low battery, or overtime. In some cases, your controller may have hardware issues requiring it to be fully replaced.Why won't my Xbox controller connect even when plugged in?
Remove accessories from your Xbox or PC: Some USB devices, including incompatible or defective USB cables, can interfere with wireless signals. Unplug all USB devices connected to your Xbox or PC. Restart your Xbox or PC and try connecting the controller again.Why is my Xbox controller suddenly not responding?
Here are some of the most common reasons for controller disconnections: The controller battery. Your controller needs new batteries or needs to charge. Outdated firmware.How to FIX Xbox One Controller Won't Sync and Blinking Lights (Easy Method)
How do I resync my Xbox controller?
To resync an Xbox One controller:
- Turn on your Xbox One.
- Turn on your controller.
- Press the sync button on the Xbox.
- Press and hold the sync button on your controller.
- Release the sync button on the controller when the Xbox light on the controller stops flashing.
How to hard reset Xbox One?
If the reset processes fail to complete on their own, you could also try the hard reset on the console. To do so, press and hold the Xbox's power button until it turns off completely. Unplug the power cord from the Xbox, wait for a few minutes, and plug it back in.How to fix an Xbox controller?
My Xbox controller won't connect or turn on
- Check the battery: Replace the controller batteries with fresh ones, or make sure that the rechargeable controllers are fully recharged. ...
- Power cycle your controller: Press and hold the Xbox button for 5-10 seconds until the controller turns off.
How to update Xbox controller?
Open the Xbox Accessories app. Connect your Xbox Wireless Controller by using a USB cable or the Xbox Wireless Adapter for Windows. When the controller is connected, you'll see the message Update Required if an update is mandatory. Install the update.Why is my Xbox controller not turning on with batteries?
Check the batteries.Remove the battery compartment on the back of the controller. Remove each battery and verify it's inserted in the correct direction. If it was installed incorrectly, put it back in the correct direction. If both batteries are installed correctly, install a pair of new batteries.
Why won't my remote connect to my Xbox One?
Make sure you've enabled remote play on your console. Press the Xbox button on your controller to open the guide, then go to Profile & system > Settings > Devices & connections > Remote features. Make sure you've selected the Enable remote features checkbox. Also make sure your console is set to Sleep mode.Why isn't my Xbox wireless working?
Try placing both the router and the Xbox One up as high as possible to reduce interference. Remove or unplug sources of interference like cordless phones, intercoms, and microwaves. Try switching your Wi-Fi network to a different channel. If you're using a 5 GHz Wi-Fi network, try switching to 2.4 GHz.How to reset Xbox without controller?
Disconnect and reconnect your console's power cable
- Turn off your console by pressing the Xbox button on the front of the console for about 10 seconds, until it shuts down completely.
- Unplug the console's power cable. ...
- Plug the console power cable back in.
- Press the Xbox button on your console to turn it on.
Why isn't my Xbox controller pairing?
If your Xbox controller won't connect, you should first make sure the batteries aren't dead. You can also try updating your Xbox One controller and console to fix the issue. Check that there are no interfering objects or devices, and move or disconnect them if necessary.How do I connect my Xbox controller again?
Simply plug the micro-USB or USB-C cable into the power port on the back of the controller then plug the other end of the cable into your Xbox console. Your controller should light up and work right away.Why is my Xbox controller blinking but not connecting?
Sometimes, a low battery may cause your controller to disconnect, act erratically, or, in some cases, start flashing. To be safe, try charging your controller for a while. That should end the blinking. Connect your controller with a USB cable instead of wirelessly.Can I reset my Xbox One controller?
You should be able to use the accessories app and then select your controller in the app and choose Configure. Choose a profile, and then select Edit > Restore to default. This returns your controller to its original factory configuration.How to get an Xbox controller to connect?
Turn on your controller by pressing the Xbox button . Press the controller's Pair button for 3 seconds and release. On your Android device, open Bluetooth by going to Apps > Settings > Connected devices > Pair new device. Your phone will show a list of nearby Bluetooth devices that are available for pairing.How do I fix my wireless Xbox controller?
Here's how:
- Turn on the console.
- Press and hold the Xbox button until the controller turns on.
- Hit the Pair button located on the front right of the console.
- Press and hold the controller's Pair button—found at the top of the controller near the USB port—within 20 seconds to finish the pairing process.
What to do if your Xbox controller is acting up?
Here are the troubleshooting steps we can perform:
- Make sure the controller is fully charged or plugged in with a USB cable.
- Reset the controller by pressing and holding the small button on the back of the controller for 5 seconds.
- Remove and reattach the paddles to the controller to ensure they are properly connected.
← Previous question
Is Nia the queen in Xenoblade 3?
Is Nia the queen in Xenoblade 3?
Next question →
Can you transfer disc games to PS5?
Can you transfer disc games to PS5?