Why won t my PS4 controller connect to my PS4 even after reset?

If your PS4 controller won't connect, try a different USB cable, in case the original one has failed. You can also reset the PS4 controller by pressing the button on the back of the controller. If your controller still won't connect to your PS4, you might need to get support from Sony.
Takedown request View complete answer on businessinsider.com

Why won't my PS4 controller connect to my PS4 anymore?

The controller's battery is dead. The controller was recently paired with another device, like a different PS4 or PC. The controller is too far from your PlayStation and is no longer connected via Bluetooth®. The Micro-USB cable that connects your controller to the console is faulty or disconnected.
Takedown request View complete answer on asurion.com

Why is my PS4 controller flashing and not connecting?

A PS4 controller may flash white due to connection issues or low battery. To reconnect your controller, boot your PS4 in safe mode by holding the power button for 8 seconds. Plug the controller in with the micro-USB cable, and then press the "PS" button on the controller.
Takedown request View complete answer on wikihow.com

How to resync PS4 controller?

Make sure the PS4 is powered down (not rest mode). Connect the USB cable to the PS4 and the other end to the PS4 controller. Press and hold the 'PS' button on the controller for 5 seconds, this will prompt the controller to re-sync with the PS4 at startup.
Takedown request View complete answer on quora.com

Why won't my PS4 controller go into pairing mode?

If your PS4 controller won't connect, try a different USB cable, in case the original one has failed. You can also reset the PS4 controller by pressing the button on the back of the controller. If your controller still won't connect to your PS4, you might need to get support from Sony.
Takedown request View complete answer on businessinsider.com

How to FIX PS4 Controller that Won't Connect (Hard Reset Method)

How do I connect my PS4 controller to my PS4 after resetting it?

Your controller should now have been reset. Connect your controller to the PS4 console using the official USB cable. Connect to a USB port on the front (or rear) of the PS4 console. Press the PS button to pair your controller with the PS4 console.
Takedown request View complete answer on playstation.com

How to fix dead PS4 controller?

To fix that, you can insert a toothpick or other similar implement into the small hole on the back of your controller for about five seconds. After that, plug the controller in, boot up your PS4, and see if the controller will take a charge. Power cycle your PS4.
Takedown request View complete answer on lifewire.com

How to hard reset PS4?

On your PS4, open the “Settings” menu. Select “Initialization.” Choose “Initialize PS4” for options on how you want to empty your system storage space. For a complete factory reset, select “Full.” This will delete everything but the operating system from your PS4.
Takedown request View complete answer on nordvpn.com

How to put PS4 in safe mode?

Turn off your console by holding the power button for three seconds. The power indicator blinks for a few moments before turning off. Once the console is off, press and hold the power button again. Release it after you hear the second beep — one beep sounds when you first press, and another seven seconds later.
Takedown request View complete answer on playstation.com

What is the white light of death on the PS4 controller?

There are two main reasons you might see the flashing white light on your DualShock controller: either the battery is dying, or the controller failed to connect to your PlayStation console.
Takedown request View complete answer on androidcentral.com

Why is my PS4 controller just flashing and not connecting?

A flashing white light on your PS4 controller usually indicates that the controller is trying to connect to the console. This can happen if the controller has been disconnected from the console or if you're using a new controller that hasn't been paired with the console.
Takedown request View complete answer on easeus.com

Why is my PS4 controller not working but the light is on?

There is a second issue which is more ordinary in nature: If you still see lights but the controller doesn't do anything, you've lost connection with the PS4 and need to pair the controller. The easiest way to do this is by pressing the reset button on the bottom near the L2 button.
Takedown request View complete answer on slashgear.com

How to pair a PS4 controller without cable?

Yes, you can connect a second controller to your PS4 without a USB cable using Bluetooth. On your console, go to “Settings” → “Devices” → “Bluetooth Devices”. On the second controller, hold down the SHARE button and the PS button for about 5 seconds to enter pairing mode.
Takedown request View complete answer on scot-comp.co.uk

How to fix PS4 controller not connecting?

How to Fix a PS4 Controller That Won't Connect
  1. Use a USB cable. ...
  2. Make sure the battery works. ...
  3. Check for a loose USB connection. ...
  4. Test your USB cable. ...
  5. Try a different USB cable. ...
  6. Sync your PS4 controller. ...
  7. Disconnect your controller from other devices. ...
  8. Remove sources of Bluetooth interference.
Takedown request View complete answer on lifewire.com

What to do when your PS4 controller turns off and wont connect?

All you need to do is turn off your PS4 and press the recessed button (using something like a straightened paperclip) for about 5 seconds to reset your controller. Resetting the controller will not affect your PS4. Only settings that apply to your controller will change.
Takedown request View complete answer on wikihow.com

How long does it take a dead PS4 controller to work?

A PS4 controllers takes about 2 to 2.5 hours to fully charge if it's completely dead. After about 1 to 1.5 hours of charging, your PS4 controller will be about halfway charged. The controller will charge more slowly if you're using it while charging.
Takedown request View complete answer on wikihow.com

How to recalibrate a PS4 controller?

Insert a needle or paperclip in the pinhole on the back of the controller. Press down and hold it for about 5 seconds. This will hard reset your controller. Power your PS4 back on.
Takedown request View complete answer on wikihow.com

How do I reset my PS4 controller with the back button?

Reset DUALSHOCK 4 back button attachment
  1. Press and hold the left-back button, right back button, and screen button at the same time.
  2. Once the reset icon appears on the screen, continue to hold for 5 seconds.
  3. When HJKL appears, the reset is done.
Takedown request View complete answer on playstation.com

What does a hard reset do to a PS4 controller?

If your controller is still having trouble and won't sync to your PlayStation 4, it may be time to run a full reset on the controller. This will revert your controller to its factory default settings, but don't worry—it won't affect your saved game data. Here's what you'll need: An unfolded paper clip or straight pin.
Takedown request View complete answer on asurion.com

How do I relink my PlayStation 4 controller?

Reconnect DUALSHOCK 4 wireless controller to your console

To reconnect your wireless controller to your PS5 console or PS4 console, connect it with a compatible USB cable and press the PS button on the wireless controller. You can then remove the USB cable and use the controller wirelessly.
Takedown request View complete answer on playstation.com

How do I resync my PS4 controller to my PlayStation?

On the PS4 controller you wish to sync, hold down the PS button and the Share button simultaneously for five seconds. When the new controller appears in the list of Bluetooth device, select it with the other controller. The new controller will then be synced with your PS4.
Takedown request View complete answer on lifewire.com

Previous question
Does Hallow grow over Crimson?
Next question
Do seasons change in Hogwarts Legacy?