What to do when your VR controller stops working?
7 fixes to try if your Oculus controller is not working
- Make sure the controller is on. ...
- Restart the headset and controller. ...
- Check the batteries. ...
- Verify the controller's connection to the headset. ...
- Re-pair the controller. ...
- Check for updates. ...
- Factory reset the headset.
Why is my VR controller not working?
The most frequent problem is simply that the batteries have died, so replace them with fresh AA batteries and try again. Restart the headset. If the controllers don't seem to work or are not being recognized, the headset might need to be rebooted. Press and hold the power button on the headset until it restarts.How can I reset my VR controller?
We also provided a video linked here to also aid you in your factory reset. To factory reset the Pro controllers, please try the following: Right Controller: Hold A and Oculus buttons until the LED begins flashing red/white. Left Controller: Hold X and Menu buttons until the LED begins flashing red/white.Why is my VR controller not waking up?
Try pressing the buttons on the controllers first to wake them up. Option 2: Low battery. Check if your controller battery has enough of a charge. If you replace the battery, make sure to insert them with the correct polarity (the positive side should point toward the bottom of the handle).Why is my Oculus go VR headset controller not working?
Oculus Go: Make sure the headset is nearby and then press and hold both the back button and the Oculus button at the same time until a light starts to blink on the controller. When the blinking stops it is reconnected and you may resume training.The WORST VR Fails...
How do I fix the Oculus Quest controller glitch?
Solve this by replacing the batteries or by charging your controllers. Reboot it. Just like a glitchy smartphone or anything else that's smart, turning it off and back on may fix your problems. To turn the system off, press Power on the headset while you're wearing it and you'll see a Power menu.How do you wake up a VR controller?
Shaking them gently will wake them up. If your controllers are off, turn them on by briefly pressing the VIVE button on the right controller and the Menu button on the left controller.How do I reset my quest 2 controller?
For Quest 3 and Quest 2: Remove the batteries from your controller for 30 seconds. Put the batteries back in and power your controllers on.How do I enable my VR controller?
Turning the controllers on or off
- To turn the controller on, press the System button until you hear a beeping sound.
- To turn the controller off, press and hold the System button until you hear a beeping sound. When you quit the SteamVR app, the controllers will automatically turn off.
Why is my Quest 2 controller not working?
Remove and Reinsert Batteries. Sometimes, removing and reinstalling the batteries can fix many basic errors, including the Oculus Quest 2 controller not working issue. To do that, you just need to take out the batteries and then put them in again after a few minutes.Why is my VR controller just blinking?
Blinking red when battery is low. Blinking blue when the controller is pairing with the headset. Blue when the controller is connecting with the headset. Orange when charging.How do I unpair and repair my VR controller?
To unpair your controllers:
- Make sure your headset is turned on, then open the Meta Quest mobile app on your phone.
- Tap Menu in the bottom right corner of the Meta Quest mobile app.
- Tap Devices.
- Tap Headset Settings, then tap Controllers.
- Tap the controller that you want to unpair, then tap Unpair Controller.
How long does a VR controller last?
The Oculus Quest 2 Touch controllers tended to last about three months per charge in our experience, or even longer if you played infrequently.Why is only one of my VR controllers working?
Check batteriesIf this doesn't help, you can remove the battery from the controller and put it back in, or replace the battery. If all that doesn't help, reconnect your controller to your Meta Quest VR headset.
How do I get my Oculus Quest 2 controller to work?
Also, here are the steps to pair the Quest pro controller:
- Open the Oculus app.
- Tap Menu in the lower right corner.
- Tap Devices.
- If necessary, select the headset.
- Tap Controllers.
- Tap Left or Right to choose which hand you'd like to pair.
How do I manually reset my Oculus 2?
To factory reset your Oculus Quest 2, turn off your headset, then press and hold the power and volume down buttons simultaneously until the boot screen loads. Then use the volume buttons to highlight the “Factory reset” button and press the power button to select it.How do I clean my VR controller?
We recommend first cleaning them thoroughly using a dry cloth or non-abrasive anti-bacterial wipes. Don't use alcohol or an abrasive cleaning solution. After the cleaning process, go ahead and reset the controllers by removing the batteries for no less than 20 minutes.Why is my quest controller not working?
Clean the tracking cameras on your headset (I recommend a microfiber cloth!), and clean the controllers as well (make sure you don't use any liquids!) Remove the controller batteries for at least 10 minutes, then replace with a fresh battery. Unpair and re-pair the controllers.Do Oculus Controllers need to be charged?
Unlike the headset with a charging port, the Oculus Quest 2 controllers operate on removable AA batteries, requiring a separate charging solution once they're depleted. Luckily, several options are available for charging these controllers, making it a relatively hassle-free process.Why is my Oculus controller messing up?
Clean the controllersDirt, dust, or debris around the controller's thumbsticks can cause drifting. A gentle cleaning can often resolve this issue.
Can I get my Oculus controller repaired?
For about half the cost of a new controller, you can get your current one repaired no matter what has gone wrong with it. If you're experiencing tracking issues, buttons no longer working, in-game flyaway, or any obvious physical damage let us know so we can help you get back to having fun!How to use Oculus without controller?
Hand tracking is a feature that allows you to use your hands instead of the Oculus Touch controllers to navigate in VR. With hand tracking enabled, the headset will use its cameras to detect the position and orientation of your hands.Why is my controller blinking and not working?
Causes of a Blinking Xbox ControllerThe controller has lost its connection with its Xbox. Repairing the controller will stop the blinking and restore its functionality. The batteries are low. Just plug in your controller to recharge its internal battery.
← Previous question
Who is the final boss in The Forest?
Who is the final boss in The Forest?
Next question →
Can you return a used console to Gamestop?
Can you return a used console to Gamestop?